Search Results

Back Interfacing of Temperature Sensor (LM35) with Arduino Uno. What is a Temperature Sensor? LM35 is a precision temperature sensor with its output proportional to the temperature (in C). With LM35, temperature can be measured more accurately than with a thermistor. It also possess low self heating and does not cause more than 0.1 C temperature rise in still air. The operating temperature range is from -55°C to 150°C. The output voltage varies by 10mV in response to ambient temperature; its scale factor is 0.01V/ C. Material Required: Material Quantity Arduino Uno 1 Temperature Sensor(LM35) 1 Jumper cables 4 Pinout Diagram: Circuit Diagram: Parameter Value VCC 5 V DC from your Arduino Ground GND from your Arduino Out Connect to Analog Pin A0 Tested Programming Code: float tempC; int reading; int tempPin = 0; void setup() { analogReference(INTERNAL); Serial.begin(9600); } void loop() { reading = analogRead(tempPin); tempC = reading / 9.31; Serial.print("Temprature= "); Serial.print(tempC); Serial.print("*C"); Serial.println(); delay(1000); } Precautions: 1. Double check the connections before powering on the circuit. 2. Don’t use loose jumper cables. 3. Check whether proper board is selected from Arduino IDE. 4. Ensure proper placement of Temperature Sensor for correct working. 5. Don’t lose hope if Temperature Sensor does not run properly for the first time, try again. Conclusion: Once your sketch is running, you have to open your serial monitor. There you can see the Temperature of the surroundings. Reference URL GET IN TOUCH We'd love to hear from you Contact Us